|
A
RS-232 or EIA-422/485 computer interface is included in the standard
unit.
Input power voltages may be 115 VAC, 230 VAC, 12 VDC, and 24
VDC.
Camera or other payload control can use a second RS-232 or
EIA-422/485 port.
Remote control utilizes dial-up or leased phone lines, fiber
optic links, or microwave links.
Camera/Lens control modules are available.
Precision positioning applications use encoders with resolutions
up to 0.025 °.
TowerCam configurations include camera, lens, weather-tight
enclosure, pan/tilt head, CTI-510 controller, modems, and
software to run on a customer-furnished PC.
ENG remote site control configurations include interfaces
with new or existing pedestals, antenna feed control, and
setting receiver parameters. AGC voltages or other
analog/digital parameters are returned to the control location
for monitoring.
Windows software packages are available for towercam, ENG,
solar tracking, and other applications.
Customized local and remote control systems can be
supplied. Systems providing monitoring and control of
ancillary equipment can be furnished.
We have furnished control system for applications and
equipment ranging from night vision surveillance, thermal
imaging, visible light cameras, and antennas.
Configurations are available for controlling from one to eight
or more heads.
|
|
Position
sensing uses potentiometers for the less precise
applications. Optical shaft encoders are used to provide
high precision positioning.
|
